One common feature of diving watches is a bezel that divers may turn to see the passing of time while submerged. This article is about how to use dive watch bezel. Divers rely on the bezel, a revolving ring around the watch face, as a basic yet essential timer. Follow these steps to utilize it:
Keeping Tabs on Time:
Get the Bezel in Right Angle: Before you go diving, or when you want to start timing anything else, turn the bezel counter-clockwise till the zero mark lines up with the minute hand.
how to use dive watch bezel
sync as the Minute Hand Rotates: The minute hand of your watch will circle the dial in sync with your dive or timed activity. The bezel does not move. You can tell the time just by looking at the bezel. As an example, after 20 minutes of submersion, the minute hand will be pointed to the bezel’s 20-minute marker.
Read more
how to wear a tennis bracelet with a watch
how to become a grey market watch dealer
how many watches should a woman own
Main Ideas:
Typically, dive watches can only be turned counter-clockwise. This ensures that the bezel does not inadvertently show a lower elapsed time than what is really happening, which is crucial while diving.
Dive bezels are handy for keeping track of the time, but before you go under the water, make sure you have enough air and check the dive tables for breaks in compression.
Aside from Scuba:
No need to limit the bezel’s use to divers! Use it to keep tabs on how much time has passed in any activity, whether it’s cooking or monitoring parking meter restrictions.
*A Complete Guide to Recognizing and Making the Most of Dive Watch Bezels*
When it comes to diving, dive watches are more than just a fashion accessory; they are lifesaving instruments that divers rely on for accurate timekeeping and navigation. The spinning bezel, a basic yet useful instrument for recording elapsed time during dives, is a major component of dive watches. This detailed article will examine diving watch bezels in detail, going into their purpose, use, and significance to divers.
1. How a Dive Watch Bezel Is Structured
First, to know how to use dive watch bezel let’s take a look at the dive watch bezel’s construction. The bezel is a revolving ring that depicts the hours and minutes and is usually seen around the watch face. It can only spin in one way at a time, often counterclockwise, to avoid divers being in danger due to changes that could be made accidentally.
2. Monitoring the Passage of Time
If you own a diving watch, you know that keeping track of the time spent submerged is its principal use. Divers set the beginning point for their descent by lining up the bezel’s marking with the minute hand. The minute hand moves forward as the seconds pass, while the marker on the bezel stays put to show how much time has passed. Divers may double-check their dive time with an easy-to-implement system, which eliminates the need to depend on electronic gadgets alone.
3. Things to Do Before Diving
It is mandatory to adjust the bezel so it aligns with the present minute hand position as part of the pre-dive inspection before beginning a dive. The precise monitoring of dive time and the use of this reference point are both made possible by this synchronization. Another precaution that divers use to avoid inadvertently exceeding their dive restrictions is to set the bezel just ahead of the current time.
4. Using it as a Timer with Countdown
Dive watch bezels may double as countdown clocks in addition to recording elapsed time. By turning the bezel, divers may set the timer to count down from a certain minute or hour. The bezel marker will eventually reach zero as the minute hand goes on, indicating that the predetermined time span has elapsed. When it comes to decompression breaks or following dive schedules, this function is lifesaver.
5. Measures for Safety and Redundancy
An essential safety feature of diving watches is the bezel, which provides redundant timekeeping during dives. Electronic dive computers are useful for tracking dive profiles, but they aren’t perfect and may break down at any moment. In these cases, the bezel is a solid backup that lets divers know how long they’ve been below and makes sure they follow all safety procedures.
Are there two ways to turn the bezel?
The bezels of diving watches normally only turn in one direction—usually counterclockwise—to avoid the possibility of unintentional changes that may lengthen the dive times.
How often is it recommended that I do a pre-dive check?
Before every dive, make sure the bezel is in the right position relative to the current time and that it is working properly.
When I’m not scuba diving, can I still use the bezel as a stopwatch?
Bezels on diving watches are most often used to keep track of dive time, but they have many other potential uses as well, including as countdown clocks in the kitchen, when working out, or even during meetings.
There the answer we give on how to use dive watch bezel. As a dependable way to keep track of time below and make sure everyone follows safety procedures, diving watch bezels are an essential tool for divers. In order to make the most of them and improve dive safety, it is crucial to understand how they work and how to use them correctly. Make sure you know your way around your diving watch bezel before your next underwater excursion so you can plunge in with confidence.
